PTJZF plastic Angle Valve

PTJZF Series 2/2 Way plastic Angle seat Valve

Bevel valve,

Control Type: Double acting, Single acting
Size: DN10 ~ DN50 (3/8" ~ 2")
Connection: BSP or NPT threaded /Welding/Clamp
Valve Actuator Size: 40mm, 50mm, 63mm, 80mm
Valve Body Material: CF8M (AISI 316) or CF8 (AISI304)
Actuator: CF8 (AISI304)
Seat: Teflon (PTFE)

Applicable Fluid: Water, alcohol, oil, fuel, steam, neutral gas or liquid, organic solvent, acid and lye
Fluid Pressure: Max. 1.6MPa (16 bar, 232Psi)
Fluid Temperature: -10 - +200
Max. Viscosity: 600 mm2/s
Control Fluid: Neutral gas, air
Control Pressure: 0.3 - 0.8MPa
Ambient Temperature: 0 - +80C

Product Description
Advantages:
1. Easy installation, maintenance-free, super long life;
2. Self-adjusting stem seals, reliable operation, , cylinder can be 360 rotated free;
3. Anti-corrosive, high flow rate, low fluid resistance, no water-hammer;
4. Low control air consumption. Optical position indication.

NOTICE:

Flow direction below the seat (direction A)

1.Valves with flow direction below the seat (direction A) ensure long service life.

2.Valves used for liquid media are water hammer-free.

3.Valves with orifice DN15/DN20/DN25 are ideal for the operating pressure of 0.3Mpa.

Valve with orifice DN32/DN40 are operated with double-acting actuators DN100.

Valve with orifice DN50 are operated with double-acting actuators DN125.

FLOW DIRECTION ABOVE THE SEAT (DIRECTION B)

Valves with direction B provide high sealing integrity, used for steam and gases media. There is a danger of water hammer, when the valves used for liquid media.